Description
Advantages:
- Interfaces: CAN and S++
- Economy: service life 3,000 h
- Commercial: service life 5,000 h
- Compatibility with all new and many conventional control units
- New 24-volt heater for commercial applications
- NEW: Power version with 5.6 kW heating performance
- Very large output range
- Utilization of residual heat through heating circuit run-on control
- Stepless heating performance control
- Noise emissions optimized
Additional features:
Economy: gasoline (also E10) and diesel (also B30)
Commercial: diesel (also B30)
Diagnostic display via EasyStart TP 7.1 control units, as well as via EasyStart CAN-based control units
Economy: suitable for altitudes up to 1,500 m above sea level; altitude adjustment can be activated manually above 1,500 m with EasyStart Pro
Commercial: automatic altitude adjustment up to 3,000 m above sea level
Connection diameters: water 20 mm, exhaust gas 24 mm, combustion air 20 mm
ADR compatible with EasyStart Pro (with “Commercial” version)
EasyStart Pro – the intelligent permanently installed control unit
The new, permanently installed EasyStart Pro control unit is based on Eberspächer CAN bus communication and is designed for the new Hydronic S3 Economy / Hydronic Commercial and Airtronic S2 / M2 heater generations. In addition to a timer function, the new control unit is equipped with many new product features such as.
Advantages:
- Intuitive navigation with control knob
- Integrated temperature sensor
- Up to two heaters can be operated separately, or two identical heaters (Airtronic or Hydronic) can be operated as a group
- Simple diagnostics function in text form for users
- Detailed diagnostics function for the workshop
- Integrated residual-heat function for Hydronic heaters: efficient heating mode by using the engine’s residual heat
- Altitude mode can be activated manually above 1,500 m (Hydronic S3 Economy)
- Easy-to-read system status display (home screen)
- Timer function: up to three programming locations available
- Display and LED color ring for clear status detection in all operating conditions
- Various installation versions possible (surface mounting with concealed or visible cable routing, flush mounting)
- Mounting-optimized ribbon cable
- Endless heater operating time can be set (Airtronic and Hydronic)
- Menu navigation available in 25 other languages in addition to English and German (from Q4/2018 via EasyScan)
Additional features:
- Setup assistant simplifies installation
- Maintenance interval setting possible
- Immediate heating via the long-press function
- Integration of an additional CAN control unit possible: EasyStart Web (from Q4/2018) or additional EasyStart Pro
- Permanent display illumination possible
- ADR compliant
- Easy diagnostics via EasyScan; no disassembly required
3 reviews for Hydronic D5E S3 w/Installation Kit and EasyStart Pro Controller (no fuel pick-up pipe)
There are no reviews yet.